74VHC374MX
| Parameters | |
|---|---|
| Factory Lead Time | 5 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74VHC374 |
| Function | Standard |
| Number of Outputs | 10 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.4 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Width | 7.493mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC374MX Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. A 2V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. The 74VHCseries comprises this type of FPGA. You should not exceed 120MHzin its output frequency. The element count is 1 . The number of terminations is 20. This D latch belongs to the family of 74VHC374. Power is provided by a 3.3V supply. There is 4pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as AHC/VHC. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 2ports are embedded in the D flip flop. In terms of quiescent current, it consumes 4μA . A total of 8 channels are available.
74VHC374MX Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
74VHC374MX Applications
There are a lot of ON Semiconductor 74VHC374MX Flip Flops applications.
- Single Up Count-Control Line
- ATE
- Dynamic threshold performance
- Memory
- Individual Asynchronous Resets
- Registers
- Pattern generators
- Differential Individual
- Memory
- Circuit Design