74VHC273N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NOT SPECIFIED |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 110MHz |
| Family | AHC/VHC |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74VHC273N Overview
The item is packaged in 20-DIP (0.300, 7.62mm)cases. Package Tubeembeds it. This output is configured with Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Through Hole. A 2V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. It belongs to the 74VHCseries of FPGAs. A frequency of 110MHzshould be the maximum output frequency. In total, it contains 1 elements. There is a consumption of 4μAof quiescent energy. There have been 20 terminations. A voltage of 3.3V provides power to the D latch. This JK flip flop has a 4pFfarad input capacitance. It belongs to the family of electronic devices known as AHC/VHC. Vsup reaches its maximum value at 5.5V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.
74VHC273N Features
Tube package
74VHC series
74VHC273N Applications
There are a lot of Rochester Electronics, LLC 74VHC273N Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Consumer
- Buffered Clock
- Common Clocks
- Buffer registers
- Power down protection
- Instrumentation
- Balanced Propagation Delays
- Data storage
- Frequency Dividers