74LVX174MTR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVX174 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 95MHz |
| Family | LV/LV-A/LVX/H |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 12.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Propagation Delay (tpd) | 22 ns |
| fmax-Min | 95 MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74LVX174MTR Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 2V~3.6Vvolt supply, it operates as follows. It is at -55°C~125°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74LVX series. You should not exceed 95MHzin its output frequency. In total, it contains 1 elements. There is 4μA quiescent consumption. Currently, there are 16 terminations. The 74LVX174 family contains it. The D flip flop is powered by a voltage of 2.7V . Its input capacitance is 5pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is a FF/Latchesbase part number assigned to the RS flip flops. Normally, the supply voltage (Vsup) should be above 2V. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. There are 3.3V power supplies attached to it.
74LVX174MTR Features
Tape & Reel (TR) package
74LVX series
3.3V power supplies
74LVX174MTR Applications
There are a lot of STMicroelectronics 74LVX174MTR Flip Flops applications.
- Memory
- Individual Asynchronous Resets
- Data Synchronizers
- Bus hold
- Computers
- Communications
- ESD performance
- Bounce elimination switch
- Latch
- Frequency division