74LVTH162374MEA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2.7V~3.6V |
| Frequency | 150MHz |
| Base Part Number | 74LVTH162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 5.3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -12mA |
| Input Capacitance | 4pF |
| Low Level Output Current | 12mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVTH162374MEA Overview
The package is in the form of 48-BSSOP (0.295, 7.50mm Width). The Tubepackage contains it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 2.7V~3.6Vvolt supply, it operates as follows. It is operating at -40°C~85°C TA. D-Typedescribes this flip flop. It belongs to the 74LVTHseries of FPGAs. This D flip flop should not have a frequency greater than 160MHz. There are 2 elements in it. During its operation, it consumes 190μA quiescent energy. Members of the 74LVTH162374family make up this object. A JK flip flop with a 4pFfarad input capacitance is used here. The electronic part is mounted in the way of Surface Mount. This board has 48 pins. A Positive Edgeclock edge trigger is used in this device. An electronic part with 16bits has been designed. The superior flexibility of this product is achieved by using 2 circuits. Optimal efficiency requires a supply voltage of 3.3V. It operates with 3 output lines. As of now, there are 2input lines. A -12mAvalue is set for the high level output current. Low level output current is set to 12mA. The operating temperature should be lower than 85°C. A temperature above -40°Cshould be used for the operation. The minimal supply voltage is 2.7V. There is a maximum voltage support of 3.6V. The frequency can be set to 150MHz.
74LVTH162374MEA Features
Tube package
74LVTH series
48 pins
16 Bits
74LVTH162374MEA Applications
There are a lot of ON Semiconductor 74LVTH162374MEA Flip Flops applications.
- Instrumentation
- Memory
- Frequency Dividers
- High Performance Logic for test systems
- Synchronous counter
- Test & Measurement
- Power down protection
- Buffered Clock
- ESD protection
- Pattern generators