74LVCH16T245DGVRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TFSOP |
| Number of Pins | 48 |
| Weight | 120.003531mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Pin Count | 48 |
| Polarity | Non-Inverting |
| Power Supplies | 1.8/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Load Capacitance | 15pF |
| Number of Ports | 2 |
| Current - Output | 32mA |
| Number of Bits | 16 |
| Propagation Delay | 4.2 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 6 ns |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 500 Mbps |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.008 A |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Control Type | COMMON CONTROL |
| Translation | 1.8/5V&1.8/5V |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
74LVCH16T245DGVRG4 Overview
TFSOP contains it.Tape & Reel (TR) is the way it is packaged.Usually, when a transmission line is terminated, there are 48 termination points used.Level translators is powered by a 1.8V supply.There are 48 pins on this device.In addition, it is designed with a pin number of 48.There are 16 bits in this electronic part, which means it is designed in such a way.There is a maximum voltage of 5.5V supported.1.65V is its minimum supply voltage.Surface Mount is used for mounting.Channels are set to 2.As part of Bus Driver/Transceivers, it belongs.A BUS TRANSCEIVER logic IC is used.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Despite the fact that it is an electronic device, it belongs to the LVC/LCX/Z family.Level translators consumes 20μA of quiescent current wLevel translatorshout being affected by outside factors.A 1.8/5V power supply is required for it to operate.In view of its reliable performance, this device can be considered suitable for TAPE AND REEL.Temperatures above -40°C should be used.Ideally, the operating temperature should be lower than 85°C.As a result of its 32mA output current, it allows for maximum design flexibility.
74LVCH16T245DGVRG4 Features
TFSOP package
48 pin count
48 pins
1.8/5V power supplies
74LVCH16T245DGVRG4 Applications
There are a lot of Texas Instruments 74LVCH16T245DGVRG4 voltage translators & level shifters applications.
- Infotainment Head Unit
- Extended Product-Change Notification
- Extended Product Life Cycle
- Printers and Other Peripherals
- Available in Military (-55°C to 125°C)
- Monitors
- Product Traceability
- I2C
- Telecom
- ADAS Fusion