74LVC2T45GN,115
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.3mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC2T45 |
| Pin Count | 8 |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.2V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 5.1 ns |
| Quiescent Current | 8μA |
| Family | LVC/LCX/Z |
| Logic Function | Transceiver, Translator |
| Data Rate | 420Mbps |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | -32mA |
| Channel Type | Bidirectional |
| Low Level Output Current | 32mA |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.2V~5.5V |
| Voltage - VCCB | 1.2V~5.5V |
| Height Seated (Max) | 0.35mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
74LVC2T45GN,115 Overview
In the package 8-XFDFN, it can be found.Level translators is packaged in the way of Tape & Reel (TR).The output it is configured with uses Tri-State, Non-Inverted.Voltage Level is the translator type of this electrical device.The electronic part is mounted in a way that corresponds to Surface Mount.This electrical device has a Channel type of Bidirectional.The temperature used for operation is -40°C~125°C TA.To achieve its exceptional flexibility, it relies on 1 circuits.Transmission lines can be terminated using 8 terminations to end them.A base part number 74LVC2T45 indicates the related parts.A supply voltage of 1.5V is used to power the device.A total of 8 pins are included.Level translators is a type of FPGA belonging to the 74LVC series.There are 8 pins on it.An electronic part with 2 bits is designed.There is a maximum voltage of 5.5V supported.A minimal voltage of 1.2V is needed to operate it.From 1.2V~5.5V, the supply rail of the VCCA is configured.The VCCB supply rail is configured from 1.2V~5.5V.Electronic parts are mounted using Surface Mount.Level translators is 2 channels.A BUS TRANSCEIVER logic IC is used.There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electronic device belongs to the family of LVC/LCX/Z.Level translators consumes 8μA of quiescent current wLevel translatorshout being affected by outside factors.
74LVC2T45GN,115 Features
8-XFDFN package
1 circuits
8 pin count
74LVC series
8 pins
74LVC2T45GN,115 Applications
There are a lot of Nexperia USA Inc. 74LVC2T45GN,115 voltage translators & level shifters applications.
- Telecom
- Personal computing
- Infotainment Head Unit
- TVs
- Controlled Baseline
- Product Traceability
- Temperature Ranges (1)
- Extended Product Life Cycle
- Motor Drives
- Industrial Equipment