74LVC1G66GM,115
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G66 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 200μA |
| Number of Ports | 2 |
| Nominal Supply Current | 100mA |
| Power Dissipation | 250mW |
| Max Supply Current | 200μA |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Turn On Delay Time | 5.3 ns |
| Family | LVC/LCX/Z |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Turn-Off Delay Time | 4.2 ns |
| Output Polarity | TRUE |
| Logic IC Type | BUS DRIVER |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height | 460μm |
| Length | 1.5mm |
| Width | 1.05mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G66GM,115 Overview
The electrical component comes in 6-XFDFN packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 6. In the case of a voltage supply of 2.7V volts, the electrical part can be powered up and run. Electronic part bodies are injected with 6 pins. These analog multiplexers are built based on SPST - NO switching circuits. Try searching for the analog switch ic with 74LVC1G66 if you are looking for variants. Analog switches have 15Ohm internal resistance. Datasheets for 6 pin functions are available upon request. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 1.65V. For this multiplexer to operate, 200μA current would be sufficient. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 200μA. It can operate from 5V operating voltages. A 1 input needs to be operated. It conducts in a 1-bit manner.
74LVC1G66GM,115 Features
Switch Circuit: SPST - NO
200μA Supply Current
-3db Bandwidth: 500MHz
1-Bit
74LVC1G66GM,115 Applications
There are a lot of Nexperia USA Inc. 74LVC1G66GM,115 Analog Switches & Multiplexers ICs applications.
- Transmit
- FTTH
- CSU
- PBX interfaces
- Access Concentrators
- High reliability control systems
- Precision instrumentation
- Digital cross connects (DSX-1)
- Frame Relay Equipment
- Cross Connects