74LVC1G384GM,132
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G384 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 200μA |
| Nominal Supply Current | 100nA |
| Power Dissipation | 250mW |
| Max Supply Current | 200μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 10 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 7.4 ns |
| -3db Bandwidth | 500MHz |
| On-State Resistance (Max) | 10Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 4.2ns, 5ns |
| Charge Injection | 7.5pC |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G384GM,132 Overview
As the electronic part is packed in 6-XFDFN, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 6. Due to its 1 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 2.7V voltage supply. A key feature of the 6 series is the inclusion of this electronic part as part of its design. These analog multiplexers are built based on SPST - NC switching circuits. Try searching for the analog switch ic with 74LVC1G384 if you are looking for variants. A 15Ohm internal resistance characterizes this multiplexer. Please refer to the datasheets for 6 pins functions. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Single supply type analogue multiplexer. It is recommended that the electrical component receives a voltage of 1.65V. This multiplexer would work with 200μA current. This analogue multiplexer requires a voltage of 1.65V~5.5V when it drains from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 200μA. The electrical part can be operated at 5V voltage levels. Operating the 1 inputs requires 1 inputs.
74LVC1G384GM,132 Features
1 Channels
Switch Circuit: SPST - NC
200μA Supply Current
-3db Bandwidth: 500MHz
74LVC1G384GM,132 Applications
There are a lot of Nexperia USA Inc. 74LVC1G384GM,132 Analog Switches & Multiplexers ICs applications.
- Microprocessor controlled systems
- T1/E1 Terminals
- SONET
- E1 Network Equipment
- SDH/SONET multiplexers
- Remote wireless modules
- Public switching systems
- CSU
- MP3 players
- Communication systems