74LVC1G3157GM,115
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 15Ohm |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LVC1G3157 |
| Pin Count | 6 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 40μA |
| Power Dissipation | 250mW |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 8.7 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Bandwidth | 300MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 42 dB |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 4ns, 3.5ns |
| Charge Injection | 7.5pC |
| Switch-off Time-Max | 5ns |
| Voltage - Supply, Single (V+) | 1.65V~5.5V |
| Height Seated (Max) | 0.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVC1G3157GM,115 Overview
Packed in 6-XFDFN, the electronic component is convenient for shipping overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Around -40°C~125°C TA is the extended operating temperature. Totally, there are 6 terminations. This electronic part offers high-quality output due to its 2 channels. It is safe to turn on and run the electronic component with a 2.7V voltage supply. A key feature of the 6 series is the inclusion of this electronic part as part of its design. Based on SPDT switching circuits, these analog multiplexers work. It consists of 1 circuits. Search with 74LVC1G3157 if you are looking for analog multiplexer variants. There is 15Ohm internal resistance in this digital multiplexer. For details about the functions of 6 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Single supply type analogue multiplexer. The lowest voltage the electronic part should receive is 1.65V. The analogue multiplexer could operate on 40μA current. Using only a single voltage supply, this analog switch requires 1.65V~5.5V voltage. There are 300MHz bandwidths for data transfer.
74LVC1G3157GM,115 Features
2 Channels
Switch Circuit: SPDT
40μA Supply Current
Bandwidth: 300MHz
74LVC1G3157GM,115 Applications
There are a lot of Nexperia USA Inc. 74LVC1G3157GM,115 Analog Switches & Multiplexers ICs applications.
- Public switching systems
- CSU
- Wireless Local Loop
- Digital access cross connects
- Precision test equipment
- Relay replacements
- Fault Tolerant Systems
- Video signal routing
- HDTV
- FTTH