74LV74DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74LV |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 1V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74LV74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1V |
| Number of Circuits | 2 |
| Clock Frequency | 110MHz |
| Propagation Delay | 11 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 58 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 17ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| fmax-Min | 56 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74LV74DB,118 Overview
It is packaged in the way of 14-SSOP (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. T flip flop uses Differentialas its output configuration. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. A supply voltage of 1V~5.5V is required for operation. It is operating at -40°C~125°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74LV series. You should not exceed 110MHzin its output frequency. There is a consumption of 20μAof quiescent energy. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74LV74. Power is provided by a 3.3V supply. Its input capacitance is 3.5pF farads. An electronic device belonging to the family LV/LV-A/LVX/Hcan be found here. This electronic part is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. There is a 5.5Vmaximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 1V is necessary for normal operation. In order to achieve its superior flexibility, 2 circuits are used. If high efficiency is desired, the supply voltage should be kept at 3.3V. There are 1 output lines in this JK flip flop. As a result, it consumes 80μA of quiescent current without being affected by external factors.
74LV74DB,118 Features
Tape & Reel (TR) package
74LV series
14 pins
74LV74DB,118 Applications
There are a lot of Nexperia USA Inc. 74LV74DB,118 Flip Flops applications.
- Consumer
- Test & Measurement
- Instrumentation
- Individual Asynchronous Resets
- Frequency Dividers
- Memory
- Automotive
- Latch-up performance
- Storage registers
- EMI reduction circuitry