74LCX374MSA
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Supplier Device Package | 20-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LCX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2V~3.6V |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 150MHz |
| Current - Quiescent (Iq) | 10μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| RoHS Status | ROHS3 Compliant |
74LCX374MSA Overview
The package is in the form of 20-SSOP (0.209, 5.30mm Width). It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. This type of FPGA is a part of the 74LCX series. A frequency of 150MHzshould not be exceeded by its output. There are 1 elements in it. Despite external influences, it consumes 10μAof quiescent current. A JK flip flop with a 7pFfarad input capacitance is used here.
74LCX374MSA Features
Tube package
74LCX series
74LCX374MSA Applications
There are a lot of Rochester Electronics, LLC 74LCX374MSA Flip Flops applications.
- Set-reset capability
- Storage Registers
- Data transfer
- Differential Individual
- Synchronous counter
- Individual Asynchronous Resets
- Parallel data storage
- Counters
- Buffer registers
- Convert a momentary switch to a toggle switch