74LCX162373MEA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LCX |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 2.5V |
| Base Part Number | 74LCX162373 |
| Output Type | Tri-State |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVC/LCX/Z |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 4 |
| Number of Output Lines | 3 |
| Length | 15.875mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LCX162373MEA Overview
The package in which it is embedded is named 48-BSSOP (0.295, 7.50mm Width). Tube is the way in which it is packaged. It uses the output configuration Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. The electronic component is mounted according to the Surface Mount method. It operates at a voltage of 2V~3.6V. A temperature of -40°C~85°C is used for operation. The 74LCX series of FPGAs is the one this FPGA belongs to. The design of this electronic part is based on 16 bits. A device with this design has 48 terminations. It belongs to 74LCX162373 family. The device works with a voltage of 2.5V for its supply voltage. It is a member of the LVC/LCX/Z family of electronic devices. In addition, it is designed with a pin number of 48. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. (Vsup) should be greater than 2V. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. A binary equivalent of the input line is generated by the 3 output lines. A total of 2 elements are contained in it.
74LCX162373MEA Features
48-BSSOP (0.295, 7.50mm Width) package
74LCX series
16 Bits
74LCX162373 family
48 pins
2 elements
74LCX162373MEA Applications
There are a lot of ON Semiconductor 74LCX162373MEA Latches applications.
- Storage
- Counter
- Sample and hold register
- Buffer/Storage Registers
- Display
- Up-Down Johnson
- Serial Output Data Queuing
- Serial Output Register
- Watches
- Multistage ripple counting