74HCT7030N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.600, 15.24mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REGISTER BASED; BUBBLE BACK 3US |
| HTS Code | 8542.39.00.01 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT7030 |
| JESD-30 Code | R-PDIP-T28 |
| Function | Asynchronous, Synchronous |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 576 64 x 9 |
| Clock Frequency | 10MHz |
| Access Time | 40ns |
| Data Rate | 29MHz |
| Organization | 64X9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Memory Density | 576 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 116.28 ns |
| Height Seated (Max) | 5.1mm |
| Length | 35.5mm |
| Width | 15.24mm |
| RoHS Status | ROHS3 Compliant |
74HCT7030N,112 Overview
You can find FIFO memory chip in the 28-DIP (0.600, 15.24mm) package.There is a case Tube in which it is packaged.It is possible to store data and applications on the FIFO chips as they have 576 64 x 9 in their memory.Regulating the temperature to -40°C~125°C ensures reliable operation.This FIFO memory has a mounting type of Through Hole .A supply voltage of 4.5V~5.5V is required for its operation.It is a component from the 74HCT series.I believe it belongs to the 74HCT7030 family of numbers.It is possible to achieve high efficiency with a supply voltage of 5V .A total of 28 terminations can be found in FIFO means.This gadget is self-contained in?FIFOs .This part has a memory type of OTHER FIFO .Normally, the component owns 5V power supplies.Additionally, this FIFO memory can be used to generate REGISTER BASED; BUBBLE BACK 3US .There is a FIFO memory IC's maximum supply voltage of 5.5V (Vsup).The supply voltage (Vsup) should remain above 4.5V to ensure normal operation.In this FIFO memory IC, the clock runs at frequency 10MHz .
74HCT7030N,112 Features
576 64 x 9 memory size
74HCT series
Best part number of 74HCT7030
FIFOs category
Clock frequency of 10MHz
74HCT7030N,112 Applications
There are a lot of NXP USA Inc. 74HCT7030N,112 FIFOs Memory applications.
- TVs
- Telecommunication
- Test Equipment
- Game Controller
- General Data Collection Applications at Low-Temperatures
- Video
- Laser Receiver System
- Desktop Computers
- Rate buffers
- GPS Offender Tracking