74HCT595N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | SERIAL STANDARD OUTPUT FOR CASCADING |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 63 ns |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT595N,112 Overview
16-DIP (0.300, 7.62mm) is the package in which the device is embedded. 16 is the sum of the number of terminations in the chip. A Tube case holds it. Parts with a 5V operating supply voltage are specified. 1 elements are present in this part. In this case, the electronic component belongs to the HCT. As you can see, this component is mounted in the way of Through Hole. Operating temperatures are within the range of -40°C~125°C. It is supplied with voltage within 4.5V~5.5V. The 74HCT series is associated with this electrical component. With 74HCT595 family search, you can find similar parts. The following additional elements are important to note: SERIAL STANDARD OUTPUT FOR CASCADING. The minimum supply voltage (Vsup) for this part should not be less than 4.5V. Voltage can be delivered at 5V. The maximum supply voltage (Vsup) for this part should not be more than 5.5V.
74HCT595N,112 Features
Mounted in Through Hole type.
Based on 74HCT595 family
It supplies 5V power
74HCT595N,112 Applications
There are a lot of NXP USA Inc. 74HCT595N,112 Shift Registers applications.
- Remote control holding register
- Delay Line
- Serial-to-parallel data conversion
- Remote control holding register
- Interconnectors
- Dual-rank shift, hold, and bus applications
- Pattern Recognizers
- Counter
- Sequence generator
- Pulse Extenders