74HCT595D,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SERIAL STANDARD OUTPUT FOR CASCADING |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 63 ns |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HCT595D,112 Overview
In package 16-SOIC (0.154, 3.90mm Width), there is an embedded device. A total of 16 terminations can be found on the chip. There is a Tube case containing it. The part's operating supply voltage is rated 5V. There are 1 elements on this part. In the HCT series, the electronic component belongs. Mounting of this component is indicated by Surface Mount. There is a range of temperatures -40°C~125°C for operation. Voltages within 4.5V~5.5V are supplied to the device. 74HCT is the series number of this electrical component. By using the 74HCT595 family, you can find similar parts. Additionally, this section contains the following: SERIAL STANDARD OUTPUT FOR CASCADING. There should be no less than 4.5V supply voltage (Vsup) for this part. 5.5V Vsup is the maximum supply voltage (Vsup) for this part.
74HCT595D,112 Features
Mounted in Surface Mount type.
Based on 74HCT595 family
74HCT595D,112 Applications
There are a lot of Nexperia USA Inc. 74HCT595D,112 Shift Registers applications.
- store data in digital form
- Parallel to serial converter
- Pseudo Random Pattern Generator
- 7-segment display control
- temporary data storage
- data manipulation
- data transfer
- ROM Chips
- Remote control holding register
- Parallel data