74HCT594S16-13
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT594 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Propagation Delay | 18 ns |
| Quiescent Current | 8μA |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| fmax-Min | 20 MHz |
| Max Frequency@Nom-Sup | 20000000Hz |
| Length | 9.9mm |
| Width | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74HCT594S16-13 Overview
16-SOIC (0.154, 3.90mm Width) is the package in which the device is embedded. A total of 16 terminations can be found on the chip. A Cut Tape (CT) case holds it. Parts with a 5V operating supply voltage are specified. 16 pins are provided on the device. Using Surface Mount as a mount point is recommended. This electronic component is classified as HCT. Surface Mount is the way in which this component is mounted. A temperature range of -40°C~125°C is used for operation. Votage is supplied within 4.5V~5.5V. This electrical component belongs to the 74HCT series. Similar parts can be found using the 74HCT594 family. It is recommended that this part's supply voltage (Vsup) must not be less than 4.5V. 1 input lines are available on the device. There is a possibility of delivering voltage at 5V. It is recommended that the maximum supply voltage for this part is not greater than 5.5V (Vsup). There is a quiescent current of 8μA in this circuit.
74HCT594S16-13 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HCT594 family
It supplies 5V power
Quiescent Current at 8μA
74HCT594S16-13 Applications
There are a lot of Diodes Incorporated 74HCT594S16-13 Shift Registers applications.
- data transfer
- temporary data storage
- Parallel data
- data manipulation
- Parallel to serial converter
- Cache memory in CPU
- Pseudo Random Pattern Generator
- Flash Memory
- Remote control holding register
- Sequence generator