74HCT594N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT594 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Family | HCT |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT594N,112 Overview
The device is embedded in 16-DIP (0.300, 7.62mm) package. 16 is the total number of terminations on the chip. Tube is the case in which it is packed. Voltage rating of the part is 5V. On this part, there are 1 elements. It is a component of the HCT. There is a component mounted in the way of Through Hole on this board. A temperature range of -40°C~125°C is used for operation. Votage within 4.5V~5.5V is supplied. It is part of the 74HCT series of electrical components. With 74HCT594 family search, you can find similar parts. The following additional elements are important to note: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There must be a minimum supply voltage (Vsup) of 4.5V for this part. Devices with voltage delivery capabilities of 5V are available. This part requires a maximum supply voltage (Vsup) of 5.5V.
74HCT594N,112 Features
Mounted in Through Hole type.
Based on 74HCT594 family
It supplies 5V power
74HCT594N,112 Applications
There are a lot of NXP USA Inc. 74HCT594N,112 Shift Registers applications.
- Counter
- Parallel to serial converter
- data transfer
- Dual-rank shift, hold, and bus applications
- Flash Memory
- Remote control holding register
- Sequence generator
- Output expansion
- store data in digital form
- Pattern Recognizers