74HCT594DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT594 |
| Function | Serial to Parallel, Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 48 ns |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| fmax-Min | 20 MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT594DB,112 Overview
The device is embedded in 16-SSOP (0.209, 5.30mm Width) package. Chip terminations add up to 16. A Tube case holds it. Voltage rating of the part is 5V. The device is equipped with 16 pins. It is recommended to mount by Surface Mount in order to get the best results. The electronic component belongs to the HCT. There is a component mounted in the way of Surface Mount on this board. There is a range of temperatures -40°C~125°C for operation. There is a voltage supply within 4.5V~5.5V. In the 74HCT series, this electrical component is found. Similar parts can be found using the 74HCT594 family. According to the specification, this chip's operating supply voltage falls within the range of 5V. Additionally, this section contains the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. As far as the device is concerned, there are 1 input lines available. There are 9 output lines to operate.
74HCT594DB,112 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HCT594 family
Operate supply voltage at 5V
With 9 output lines
74HCT594DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT594DB,112 Shift Registers applications.
- Output expansion
- Dual-rank shift, hold, and bus applications
- Interconnectors
- Remote control holding register
- Serial-to-parallel data conversion
- data manipulation
- Serial-to-parallel data conversion
- Delay Line
- store data in digital form
- Parallel to serial converter