74HCT4094N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4094 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 65 ns |
| fmax-Min | 20 MHz |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height Seated (Max) | 4.2mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT4094N,112 Overview
This device can be found embedded within the package 16-DIP (0.300, 7.62mm). 16 is the sum of the number of terminations in the chip. It is packed in a case number Tube. This part has an operating supply voltage of 5V. 1 elements are present in this part. In the HCT series, the electronic component belongs. As you can see, this component is mounted in the way of Through Hole. The operating temperature ranges -40°C~125°C. Votage within the range of 4.5V~5.5V is supplied. In this case, the electrical component belongs to the series 74HCT. Similar parts can be found by searching for the 74HCT4094 family. Additionally, this section contains the following: PARALLEL OUTPUT IS LATCHED; UNLATCHED SERIAL SHIFT RIGHT OUTPUT. Ensure that Vsup is not less than 4.5V when powering this part. A voltage of 5V can be delivered by it. A maximum supply voltage (Vsup) of 5.5V may be applied to this part.
74HCT4094N,112 Features
Mounted in Through Hole type.
Based on 74HCT4094 family
It supplies 5V power
74HCT4094N,112 Applications
There are a lot of NXP USA Inc. 74HCT4094N,112 Shift Registers applications.
- Delay Line
- Sequence generator
- Parallel to serial converter
- 7-segment display control
- Data Format Converters
- Dual-rank shift, hold, and bus applications
- Serial to parallel converter
- Data manipulation
- Pulse Extenders
- store data in digital form