74HCT4052N,112
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4052 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5GND/-5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V ±1V~5V |
| Supply Current-Max (Isup) | 0.16mA |
| Neg Supply Voltage-Nom (Vsup) | -4.5V |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 150Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 2μA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 60ns, 48ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 57ns |
| Length | 19.05mm |
| RoHS Status | ROHS3 Compliant |
74HCT4052N,112 Overview
Packed in 16-DIP (0.300, 7.62mm), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. 4:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. In total, there have been 16 terminations. The electronic part provides high-quality output because it has 4 channels. When the electronic component is given a voltage of 4.5V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Try searching for the analog switch ic with 74HCT4052 if you are looking for variants. In this analog multiplexer, the value is Multiplexer or Switches. A DIFFERENTIAL MULTIPLEXER analog IC is integrated into the board.
74HCT4052N,112 Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 180MHz
74HCT4052N,112 Applications
There are a lot of NXP USA Inc. 74HCT4052N,112 Analog Switches & Multiplexers ICs applications.
- Cross Connects
- Data Acquisition Systems
- Remote wireless modules
- ISDN NT1/TA
- Battery-powered systems
- E1 Multiplexer
- Avionics and Military Systems
- DSLAMs
- Cell phones
- Frame Relay Equipment