74HCT4040PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT4040 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Load Capacitance | 50pF |
| Propagation Delay | 68 ns |
| Turn On Delay Time | 68 ns |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 12 |
| Trigger Type | Negative Edge |
| fmax-Min | 20 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 79MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT4040PW,112 Overview
This device is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. The configuration of this device is based on 16terminations. Having a supply voltage of 5V enables to operate in a fully flexible manner. An interconnection of 1elements is provided by wires. In total, there are 16pins on the component. As a result, it is packaged as Tube. In the circuit, there are 16pins that connect other components. It is mounted in the manner of [0]. The HCTfamily includes it. The 74HCTseries offers a wide range of applications due to its versatility. Binary Counteris selected as the logic type. Setting the operating temperature to -40°C~125°C is recommended. Mounting type Surface Mountis used. Providing a voltage of 4.5V~5.5Vensures higher reliability of operation. It contains 12elements. Among its base part number [0], you will find additional parts that are related. To operate, it requires a supply voltage of 5V volts.
74HCT4040PW,112 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
12 bits per element
Operating supply voltage of 5V
74HCT4040PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT4040PW,112 Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Up Counters
- Divide-by-N counting
- SQUARING
- Analog multiplexing and demultiplexing
- SQUARE ROOT
- Binary counter/decoder
- Divide-by"N" counters/frequency synthesizers
- Frequency division
- counting/frequency sy nthesizers-BCD output