74HCT377DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT377 |
| Function | Standard |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Bits | 8 |
| Clock Frequency | 53MHz |
| Propagation Delay | 14 ns |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 32ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HCT377DB,112 Overview
It is packaged in the way of 20-SSOP (0.209, 5.30mm Width). You can find it in the Tubepackage. Non-Invertedis the output configured for it. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. The FPGA belongs to the 74HCT series. A frequency of 53MHzshould be the maximum output frequency. D latch consists of 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74HCT377 family. It is powered from a supply voltage of 5V. Input capacitance of this device is 3.5pF farads. It is a member of the HCTfamily of D flip flop. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. A Positive Edgeclock edge trigger is used in this device. An electronic part with 8bits has been designed. Optimal efficiency requires a supply voltage of 5V. It is reported that there are 8 input lines. There is also a characteristic of WITH HOLD MODE.
74HCT377DB,112 Features
Tube package
74HCT series
20 pins
8 Bits
74HCT377DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT377DB,112 Flip Flops applications.
- Bus hold
- Matched Rise and Fall
- Count Modes
- ESCC
- Cold spare funcion
- Common Clocks
- CMOS Process
- Dynamic threshold performance
- Computers
- Single Up Count-Control Line