74HCT273PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 36MHz |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 30ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT273PW,112 Overview
The flip flop is packaged in 20-TSSOP (0.173, 4.40mm Width). It is contained within the Tubepackage. T flip flop uses Non-Invertedas the output. There is a trigger configured with Positive Edge. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. -40°C~125°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74HCT series. This D flip flop should not have a frequency greater than 36MHz. D latch consists of 1 elements. It consumes 8μA of quiescent current without being affected by external factors. The number of terminations is 20. You can search similar parts based on 74HCT273. The power supply voltage is 5V. Its input capacitance is 3.5pF farads. Devices in the HCTfamily are electronic devices. It is mounted by the way of Surface Mount. 20pins are included in its design. It has a clock edge trigger type of Positive Edge. An electronic part designed with 8bits is used in this application. Optimal efficiency requires a supply voltage of 5V. A total of 8input lines have been provided.
74HCT273PW,112 Features
Tube package
74HCT series
20 pins
8 Bits
74HCT273PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT273PW,112 Flip Flops applications.
- ATE
- Individual Asynchronous Resets
- Digital electronics systems
- Communications
- Pattern generators
- Shift Registers
- Supports Live Insertion
- Synchronous counter
- Functionally equivalent to the MC10/100EL29
- Registers