74HCT174PW-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HCT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Clock Frequency | 69MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 53 ns |
| fmax-Min | 20 MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT174PW-Q100J Overview
The item is packaged in 16-TSSOP (0.173, 4.40mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. In the configuration, Non-Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~125°C TAis used in the operation. D-Typedescribes this flip flop. FPGAs belonging to the 74HCTseries contain this type of chip. You should not exceed 69MHzin the output frequency of the device. A total of 1elements are contained within it. As a result, it consumes 8μA quiescent current and is not affected by external forces. The number of terminations is 16. JK flip flop belongs to 74HCT174 family. The D flip flop is powered by a voltage of 5V . Input capacitance of this device is 3.5pF farads. In this case, the D flip flop belongs to the HCTfamily. There are 16pins on it. The supply voltage should be maintained at 5V for high efficiency.
74HCT174PW-Q100J Features
Tape & Reel (TR) package
74HCT series
16 pins
74HCT174PW-Q100J Applications
There are a lot of Nexperia USA Inc. 74HCT174PW-Q100J Flip Flops applications.
- Reduced system switching noise
- Balanced Propagation Delays
- Cold spare funcion
- Latch-up performance
- Computers
- Instrumentation
- Registers
- Buffer registers
- Set-reset capability
- Data transfer