74HCT166N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | CLOCK INHIBIT |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT166 |
| Function | Parallel or Serial to Serial |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 60 ns |
| Count Direction | RIGHT |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.7mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT166N,652 Overview
The device is embedded in 16-DIP (0.300, 7.62mm) package. It sums up to 16 where the chip's terminations add up. It is packed in a case number Tube. Voltage rating of the part is 5V. This part has 1 elements. This electronic component is classified as HCT. Mounting of this component is indicated by Through Hole. -40°C~125°C is the operating temperature range. There is a votage of 4.5V~5.5V provided with it. In the 74HCT series, this electrical component is found. If you use the 74HCT166 family, you can find parts that are similar. Additionally, please note the following: CLOCK INHIBIT. There should be no less than 4.5V supply voltage (Vsup) for this part. There is a possibility of delivering voltage at 5V. It should not exceed 5.5V in terms of the supply voltage (Vsup).
74HCT166N,652 Features
Mounted in Through Hole type.
Based on 74HCT166 family
It supplies 5V power
74HCT166N,652 Applications
There are a lot of NXP USA Inc. 74HCT166N,652 Shift Registers applications.
- 7-segment display control
- data manipulation
- Interconnectors
- Parallel to serial converter
- store data in digital form
- Pattern Recognizers
- data transfer
- 8-bit data storage
- Counter
- Data Processors