74HC595DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | SERIAL STANDARD OUTPUT FOR CASCADING |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 35 ns |
| Quiescent Current | 160μA |
| Turn On Delay Time | 265 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 4 |
| Number of Output Lines | 10 |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC595DB,112 Overview
As a result, 16-SSOP (0.209, 5.30mm Width) package contains the embedded device. 16 is the total number of terminations on the chip. There is a Tube case containing it. Parts with a 5V operating supply voltage are specified. There are 1 elements on this part. 16 pins are present on the device. It is recommended to mount by Surface Mount in order to get the best results. In the HC/UH series, the electronic component belongs. Its mounting method is Surface Mount. Operating temperatures are within the range of -40°C~125°C. Votage is supplied within 2V~6V. The 74HC series is associated with this electrical component. If you use the 74HC595 family, you can find parts that are similar. The operating supply voltage of this chip is noted to be within the range 5V. This section has the following additional features: SERIAL STANDARD OUTPUT FOR CASCADING. For this part, the minimum supply voltage (Vsup) should not be less than 2V. A device with 4 input lines is available. A maximum supply voltage (Vsup) of 6V may be applied to this part. There are 10 output lines to operate. It runs on a quiescent current of 160μA.
74HC595DB,112 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
With 10 output lines
Quiescent Current at 160μA
74HC595DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC595DB,112 Shift Registers applications.
- Sequence generator
- Data Processors
- Data manipulation
- Counter
- temporary data storage
- Pattern Recognizers
- data transfer
- Flash Memory
- Serial-to-parallel data conversion
- ROM Chips