74HC595D,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SERIAL STANDARD OUTPUT FOR CASCADING |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 108MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Nominal Supply Current | 70mA |
| Propagation Delay | 16 ns |
| Family | HC/UH |
| Number of Inputs | 1 |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 24 MHz |
| Count Direction | RIGHT |
| Ambient Temperature Range High | 125°C |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HC595D,112 Overview
The device is embedded in 16-SOIC (0.154, 3.90mm Width) package. Chip terminations add up to 16. This item is packed in case Tube. The part operates at 5V voltage. The device is equipped with 16 pins. Electronic components are categorized as HC/UH. Surface Mount is the way in which this component is mounted. There is a temperature range of -40°C~125°C. Votage is provided within 2V~6V. 74HC is the series number of this electrical component. By using the 74HC595 family, you can find similar parts. Additional aspects of this section are as follows: SERIAL STANDARD OUTPUT FOR CASCADING. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. The maximum supply voltage (Vsup) for this part should not be more than 6V. The device runs at 108MHz.
74HC595D,112 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
74HC595D,112 Applications
There are a lot of Nexperia USA Inc. 74HC595D,112 Shift Registers applications.
- Serial to parallel converter
- temporary data storage
- Cache memory in CPU
- Pulse Extenders
- ROM Chips
- Dual-rank shift, hold, and bus applications
- 8-bit data storage
- store data in digital form
- Output expansion
- data manipulation