74HC4094PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | UNLATCHED SERIAL SHIFT RIGHT OUTPUT; PARALLEL OUTPUT IS LATCHED |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 77MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4094 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 295 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 295 ns |
| Family | HC/UH |
| Logic Function | Latch, Shift Register |
| Number of Inputs | 1 |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Gates | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 10 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4094PW,118 Overview
16-TSSOP (0.173, 4.40mm Width) package contains the device. 16 is the number of terminations on the chip. Presented in a case of Tape & Reel (TR). Parts with a 5V operating supply voltage are specified. There are 1 elements on this part. It is equipped with a pin count of 16. Surface Mount is recommended for mounting. Electronic components fall under the category of HC/UH. This component is mounted in the way of Surface Mount. Operating temperatures are within the range of -40°C~125°C. During operation, the voltage is within the range of 2V~6V. This electrical component belongs to the 74HC series. If you use the 74HC4094 family, you can find parts that are similar. It is noted that this chip uses an operating supply voltage of 5V. Additional aspects of this section include: UNLATCHED SERIAL SHIFT RIGHT OUTPUT; PARALLEL OUTPUT IS LATCHED. For this part, the minimum supply voltage (Vsup) should not be less than 2V. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. A total of 8 bits are present on an IC chip. It is necessary to operate 10 output lines of the system. A quiescent current of 8μA is used. 77MHz is the device's frequency.
74HC4094PW,118 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC4094 family
Operate supply voltage at 5V
With 10 output lines
Quiescent Current at 8μA
74HC4094PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4094PW,118 Shift Registers applications.
- Data Processors
- Dual-rank shift, hold, and bus applications
- temporary data storage
- Counter
- Pseudo Random Pattern Generator
- Data manipulation
- Remote control holding register
- Remote control holding register
- data manipulation
- Output expansion