74HC374DTR2G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 35MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74HC374DTR2G Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74HC series. You should not exceed 35MHzin the output frequency of the device. In total, there are 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. The power source is powered by 3V. There is 10pF input capacitance for this T flip flop. It belongs to the family of electronic devices known as HC/UH. The maximal supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. The D flip flop has no ports embedded.
74HC374DTR2G Features
Tape & Reel (TR) package
74HC series
74HC374DTR2G Applications
There are a lot of Rochester Electronics, LLC 74HC374DTR2G Flip Flops applications.
- Buffer registers
- Data Synchronizers
- Common Clocks
- Power down protection
- Guaranteed simultaneous switching noise level
- Memory
- Divide a clock signal by 2 or 4
- Storage registers
- Synchronous counter
- Set-reset capability