74HC273D,652
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 122MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 225 ns |
| fmax-Min | 24 MHz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HC273D,652 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). It is contained within the Tubepackage. In the configuration, Non-Invertedis used as the output. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 2V~6V. A temperature of -40°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. It is a type of FPGA belonging to the 74HC series. In order for it to function properly, its output frequency should not exceed 122MHz. A total of 1elements are contained within it. There is a consumption of 8μAof quiescent energy. It has been determined that there have been 20 terminations. The object belongs to the 74HC273 family. The D flip flop is powered by a voltage of 5V . JK flip flop input capacitance is 3.5pF farads. HC/UHis the family of this D flip flop. The electronic flip flop is designed with pins 20. Vsup reaches its maximum value at 6V. Normal operation requires a supply voltage (Vsup) above 2V. Featuring the maximum design flexibility, it has an output current of 5.2mA .
74HC273D,652 Features
Tube package
74HC series
20 pins
74HC273D,652 Applications
There are a lot of Nexperia USA Inc. 74HC273D,652 Flip Flops applications.
- Single Up Count-Control Line
- Single Down Count-Control Line
- ATE
- Differential Individual
- Consumer
- Clock pulse
- Data transfer
- Pattern generators
- Buffered Clock
- Event Detectors