74HC166DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 13 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | CLOCK INHIBIT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC166 |
| Function | Parallel or Serial to Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 15 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 240 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 20 MHz |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC166DB,118 Overview
There is a 16-SSOP (0.209, 5.30mm Width) package embedded with the device. It sums up to 16 where the chip's terminations add up. Presented in a case of Tape & Reel (TR). The part's operating supply voltage is rated 5V. 1 elements make up this part. 16 pins are located on the device. Surface Mount is recommended for mounting. The electronic component belongs to the HC/UH. Mounted in the same way as Surface Mount. It is important to note that the operating temperature range is -40°C~125°C. Votage is provided within 2V~6V. It is part of the 74HC series of electrical components. A 74HC166 family can be used to search for similar parts. It is noted that the operating supply voltage of this chip falls within the range 5V. The following additional aspects of this section are worth noting: CLOCK INHIBIT. It is recommended that this part's supply voltage (Vsup) must not be less than 2V. 9 input lines are available on the device. 6V Vsup is the maximum supply voltage (Vsup) for this part. The current is 8μA during quiescent operation.
74HC166DB,118 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
Quiescent Current at 8μA
74HC166DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC166DB,118 Shift Registers applications.
- LED matrix control
- Pattern Recognizers
- Pseudo Random Pattern Generator
- store data in digital form
- Generate time delay toward digital circuits
- Serial to parallel converter
- 8-bit data storage
- Serial-to-parallel data conversion
- Sequence generator
- Serial-to-parallel data conversion