74HC165PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | CLOCK INHIBIT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC165 |
| Function | Parallel or Serial to Serial |
| Output Type | Complementary |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 28 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 250 ns |
| Family | HC/UH |
| Logic Function | OR, Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 9 |
| fmax-Min | 20 MHz |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC165PW,112 Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) package. This chip has a total termination count of 16. It is used to pack in Tube case. Parts with a 5V operating supply voltage are specified. On this part, there are 1 elements. The device is equipped with 16 pins. As a general recommendation, mounting by Surface Mount is recommended. An electronic component is included in the HC/UH. Mounted in the same way as Surface Mount. A temperature range of -40°C~125°C is used for operation. Votage within the range of 2V~6V is supplied. This electrical component belongs to the 74HC series. With 74HC165 family search, you can find similar parts. In terms of supply voltage, this chip operates within the range of 5V. Please take note of the following additional aspects of this section: CLOCK INHIBIT. This part should have a minimum supply voltage (Vsup) of at least 2V. The device has 9 input lines. 6V Vsup is the maximum supply voltage (Vsup) for this part. The current is 8μA during quiescent operation.
74HC165PW,112 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC165 family
Operate supply voltage at 5V
Quiescent Current at 8μA
74HC165PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC165PW,112 Shift Registers applications.
- Delay Line
- Pseudo Random Pattern Generator
- 7-segment display control
- Serial-to-parallel data conversion
- Remote control holding register
- Flash Memory
- 8-bit data storage
- Pattern Recognizers
- Output expansion
- Remote control holding register