74HC161PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2013 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HC161 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 330 ns |
| Turn On Delay Time | 330 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 48MHz |
| Timing | Asynchronous/Synchronous |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC161PW,112 Overview
A device of this type is supplied in a package of type [0]. The configuration of this device is based on 16terminations. The supply voltage of 5V enables it operate in a fully flexible way. 1 elements are interconnected in wires. A total of 16pins are available on all components. There is a package in the form of Tube. Circuit components are connected with 16pins. Surface Mountis the way in which it is mounted. It emerges as a member of HC/UH family. As a member of the 74HCseries, it is ideal for a wide range of applications. It is decided to use the logic type [0]. Ideally, the operating temperature should be set to -40°C~125°C. This device is mounted in a Surface Mountmanner. In the presence of the supply voltage of [0], it can operate more reliably. There are 4bits stored in each element of the array. This electronic device is equipped with the following features [0]. Under its base part number of [0], you will find additional related parts. The device requires a supply voltage of [0]. It is possible to supply the device with the minimum supply voltage (Vsup) of 2V. Up to a maximum voltage of 6Vcan be supplied (Vsup).
74HC161PW,112 Features
Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
74HC161PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC161PW,112 Counters & Dividers applications.
- MULTIPLICATION
- DIVISION
- Decade counter/decimal decode display (CD4017B）
- Up Counters
- SQUARING
- Clocks
- counting/frequency sy nthesizers-BCD output
- TRUE RMS-TO-DC CONVERSION
- POWER COMPUTATION
- VHF, UHF, FM, AM, etc.