74FCT574ATQG
| Parameters | |
|---|---|
| Low Level Output Current | 48mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Height | 1.47mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Weight | 241.197743mg |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
74FCT574ATQG Overview
QSOPis the packaging method. The list contains 1 elements. There have been 20 terminations. The D flip flop is powered by a voltage of 5V . A device of this type belongs to the family of FCT. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. Flip flops designed with 8bits are used in this part. The power supply is 5V. A total of 2ports are embedded in the D flip flop. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. 1mAquiescent current consumed. Additionally, it is characterized by BROADSIDE VERSION OF 374. -15mAis the output current at high level. Low level output current is set to 48mA. There should be a temperature below 85°Cduring operation. It is recommended that the operating temperature be greater than -40°C. A minimum supply voltage of 4.75V is required for these RS flip flops to operate. A maximum voltage of 5.25V can be provided by it. This logic IC is BUS DRIVER. A total of 1 functions are available on the T flip flop. The D latch is equipped with 20 pins.
74FCT574ATQG Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT574ATQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT574ATQG Flip Flops applications.
- Bounce elimination switch
- CMOS Process
- Computers
- Pattern generators
- Buffer registers
- ESD performance
- Control circuits
- Bus hold
- Convert a momentary switch to a toggle switch
- Memory