74FCT163374CPVG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 48 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 100nA |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -8mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 15.9mm |
| Width | 7.5mm |
| Thickness | 2.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT163374CPVG Overview
In package SSOP, there is an embedded device. This chip has a total termination count of 48. 3.3V is the operating supply voltage of the part. On this part, there are 2 elements. 48 pins are provided on the device. Mounting by Surface Mount is recommended. In the FCT series, the electronic component belongs. It is noted that the operating supply voltage of this chip falls within the range 3.3V. The following additional elements are important to note: MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V. It has 16 bits in total. It has a total of zero pins. A temperature below 85°C is recommended for its use. This device should not be operated with a value lower than -40°C. This supply voltage is employed under 3.6V. The supply voltage is higher than 2.7V. A quiescent current of 100nA is used. In terms of its subcategory, it belongs to FF/Latches.
74FCT163374CPVG Features
With 48 pins
Operate supply voltage at 3.3V
Quiescent Current at 100nA
74FCT163374CPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163374CPVG Shift Registers applications.
- data manipulation
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Delay Line
- Sequence generator
- Generate time delay toward digital circuits
- Pattern Recognizers
- Parallel data
- Data Format Converters
- Remote control holding register