74FCT163374CPAG8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Published | 2002 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 5.5 ns |
| Quiescent Current | 100nA |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | -8mA |
| Low Level Output Current | 24mA |
| Clock Edge Trigger Type | Positive Edge |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT163374CPAG8 Overview
There is an embedded device in the package TSSOP. The number of the chip's terminations sums up to 48. 3.3V is the operating supply voltage of the part. On this part, there are 2 elements. It has 48 pins. The recommended mounting method is Surface Mount. In the FCT series, the electronic component belongs. This chip's operating supply voltage is reported as 3.3V. There are also the following additional considerations in this section: MAX O/P SKEW = 0.5NS; TYP VOLP = 0.3V. A total of 16 bits are present on an IC chip. It has a total of 48 pins. Under temperatures below 85°C, it is recommended to use it. It should not be lower than -40°C to operate this device. A voltage of 3.6V is used to supply this voltage. Voltages higher than 2.7V are used for this supply. As a result, it runs at a quiescent current of 100nA. This subcategory falls under the FF/Latches category. TAPE AND REEL is the way the part is packaged.
74FCT163374CPAG8 Features
With 48 pins
Operate supply voltage at 3.3V
Quiescent Current at 100nA
Packing Method : TAPE AND REEL
74FCT163374CPAG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT163374CPAG8 Shift Registers applications.
- Serial to parallel converter
- Cache memory in CPU
- Pattern Recognizers
- Pulse Extenders
- Serial-to-parallel data conversion
- Data Processors
- Parallel data
- LED matrix control
- Interconnectors
- Serial-to-parallel data conversion