74F74
| Parameters | |
|---|---|
| Surface Mount | NO |
| JESD-609 Code | e3 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | FF/Latches |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 14 |
| JESD-30 Code | R-PDIP-T14 |
| Qualification Status | Not Qualified |
| Operating Temperature (Max) | 70°C |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Bits | 1 |
| Family | F/FAST |
| Output Polarity | COMPLEMENTARY |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.02 A |
| Trigger Type | POSITIVE EDGE |
| Propagation Delay (tpd) | 9.2 ns |
| Power Supply Current-Max (ICC) | 16mA |
| fmax-Min | 100 MHz |
| Max Frequency@Nom-Sup | 100000000Hz |
| Height Seated (Max) | 5.08mm |
| Length | 19.18mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
74F74 Overview
This trigger uses the value POSITIVE EDGE. Currently, there are 14 terminations. It is powered from a supply voltage of 5V. Devices in the F/FASTfamily are electronic devices. The RS flip flops belongs to FF/Latches base part number. There are 1bits in its design. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). A normal operating voltage (Vsup) should remain above 4.5V. It runs on 5Vvolts of power. The logic IC it adopts is D FLIP-FLOP. Currently, it is equipped with 2 functions . The JK flip flop has a pin count of 14.
74F74 Features
1 Bits
5V power supplies
2 Functions
14 pin count
74F74 Applications
There are a lot of Fairchild (ON Semiconductor) 74F74 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- ESCC
- Power down protection
- Cold spare funcion
- Synchronous counter
- Dynamic threshold performance
- Modulo – n – counter
- Asynchronous counter
- Safety Clamp
- Data Synchronizers