74F534SJ
| Parameters | |
|---|---|
| Clock Frequency | 100MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 86mA |
| Current - Output High, Low | 3mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -3mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 100MHz |
| Base Part Number | 74F534 |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
74F534SJ Overview
In the form of 20-SOIC (0.209, 5.30mm Width), it has been packaged. It is contained within the Tubepackage. T flip flop uses Tri-State, Invertedas the output. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. In the operating environment, the temperature is 0°C~70°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74Fseries contain this type of chip. Its output frequency should not exceed 100MHz Hz. A total of 1elements are contained within it. It consumes 86mA of quiescent current without being affected by external factors. This D latch belongs to the family of 74F534. Surface Mount mounts this electronic component. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. The flip flop is designed with 8bits. The superior flexibility is achieved through the use of 8 circuits. In order to ensure high efficiency, the supply voltage should remain at 5V. It operates with 8 output lines. A total of 1input lines have been provided. A -3mAis set for the high level output current. The low level output current is set to 24mA. The operating temperature should be lower than 70°C. In order for the system to operate properly, the temperature should be higher than 0°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. There is a maximum voltage support of 5.5V. It is possible to achieve 100MHz frequencies.
74F534SJ Features
Tube package
74F series
20 pins
8 Bits
74F534SJ Applications
There are a lot of ON Semiconductor 74F534SJ Flip Flops applications.
- Data Synchronizers
- Count Modes
- Communications
- Single Up Count-Control Line
- ESCC
- Test & Measurement
- Pattern generators
- Shift registers
- Set-reset capability
- ATE