74F533PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | MATTE TIN |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | F/FAST |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 3mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | INVERTED |
| Independent Circuits | 1 |
| Delay Time - Propagation | 6.7ns |
| Height Seated (Max) | 5.08mm |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74F533PC Overview
It is embedded in the 20-DIP (0.300, 7.62mm) package. This package has the format of Tube. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Through Hole mount is used for mounting this electronic part. It operates with a supply voltage of 4.5V~5.5V. It operates at 0°C~70°C degrees Celsius. An FPGA of this type belongs to the 74F series. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device is operated when the supply voltage is set to 5V. There are 20 pins attached to it. It is a member of the F/FAST family of electronic devices. 2 ports are available on this device. 5.5V is the maximum voltage (Vsup) that can be supplied. Ensure that the supply voltage (Vsup) is greater than 4.5V.
74F533PC Features
20-DIP (0.300, 7.62mm) package
74F series
8 Bits
20 pin count
74F533PC Applications
There are a lot of Rochester Electronics, LLC 74F533PC Latches applications.
- Ring counter
- Shift right register
- Shift right with parallel loading
- Hammer
- Meter applications
- Serial Output Data Queuing
- Synchronous frequency dividers
- Parallel data storage
- Four-bit storage with output enable
- Accumulator Registers