74F175SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 140MHz |
| Base Part Number | 74F175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 34mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 8.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F175SC Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. The package Tubecontains it. Differentialis the output configured for it. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at 0°C~70°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74F series. In order for it to function properly, its output frequency should not exceed 140MHz. The list contains 1 elements. There is a consumption of 34mAof quiescent energy. The 74F175 family contains it. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. In this device, the clock edge trigger type is Positive Edge. The flip flop is designed with 4bits. In order to achieve its superior flexibility, 4 circuits are used. For high efficiency, the supply voltage should be kept at 5V. It operates with 3 output lines. This input has 4lines in it. There is -1mA output current at the high level. In the low level output current setting, the current is set to 20mA. It is recommended that the operating temperature be lower than 70°C. It should be higher than 0°Cwhen the system is operating. In order for it to operate, a supply voltage of 4.5Vis required. It supports the maximal supply voltage of 5.5V. We are able to achieve a frequency of 140MHz.
74F175SC Features
Tube package
74F series
16 pins
4 Bits
74F175SC Applications
There are a lot of ON Semiconductor 74F175SC Flip Flops applications.
- Frequency Dividers
- ESCC
- Frequency division
- 2 – Bit synchronous counter
- Pattern generators
- Convert a momentary switch to a toggle switch
- Clock pulse
- Modulo – n – counter
- Dynamic threshold performance
- Instrumentation