74F109SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOP |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74F |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 125MHz |
| Base Part Number | 74F109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 1 |
| Clock Frequency | 125MHz |
| Propagation Delay | 8 ns |
| Turn On Delay Time | 5.2 ns |
| Logic Function | AND, Flip-Flop |
| Current - Quiescent (Iq) | 17mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -1mA |
| Low Level Output Current | 20mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74F109SJ Overview
The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). A package named Tubeincludes it. T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at 0°C~70°C TA. The type of this D latch is JK Type. In this case, it is a type of FPGA belonging to the 74F series. You should not exceed 125MHzin the output frequency of the device. A total of 2 elements are present. As a result, it consumes 17mA quiescent current. It is a member of the 74F109 family. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. It has a clock edge trigger type of Positive Edge. The flip flop is designed with 1bits. Using 2 circuits, it is highly flexible. High efficiency requires the supply voltage to be maintained at 5V. To operate, the chip has a total of 3 output lines. This input has 2lines in it. It is set to -1mAfor the high level output current. The low level output current is set to 20mA. Ideally, the operating temperature should be lower than 70°C. Operating temperatures should be above 0°C. The minimal supply voltage is 4.5V. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 125MHz.
74F109SJ Features
Tube package
74F series
16 pins
1 Bits
74F109SJ Applications
There are a lot of ON Semiconductor 74F109SJ Flip Flops applications.
- Common Clocks
- Buffered Clock
- EMI reduction circuitry
- Counters
- Storage registers
- Shift Registers
- Functionally equivalent to the MC10/100EL29
- Individual Asynchronous Resets
- Shift registers
- Buffer registers