74AVC16374DGGRE4
| Parameters | |
|---|---|
| Current - Output | 12mA |
| Number of Bits | 16 |
| Propagation Delay | 9.4 ns |
| Turn On Delay Time | 7.3 ns |
| Family | AVC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 3.3 ns |
| High Level Output Current | -12mA |
| Low Level Output Current | 12mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Pin Count | 48 |
| Polarity | Non-Inverting |
| Power Supplies | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.4V |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
74AVC16374DGGRE4 Overview
It is embeded in TSSOP case. You can find it in the Tape and Reelpackage. A total of 48terminations have been recorded. It is powered from a supply voltage of 1.5V. AVCis the family of this D flip flop. Surface Mount mounts this electronic component. The 48pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. It is included in Bus Driver/Transceiver. 16bits are used in its design. The superior flexibility of this product is achieved by using 2 circuits. The D latch runs on a voltage of 3.3V volts. The D flip flop is embedded with 2ports. It has 8lines. A -12mAvalue is set for the high level output current. It is set to 12mAfor the low level output current. A temperature below 85°Cshould be used for operation. In order for the system to operate properly, the temperature should be higher than -40°C. It operates with the minimal supply voltage of 1.4V. It supports a maximum supply voltage of 3.6V volts. It is possible to achieve 200MHz frequencies. BUS DRIVERis the logic IC it uses. Currently, it is equipped with 2 functions . 48pins are provided on the D latch. 12mA provides maximum design flexibility due to its output current.
74AVC16374DGGRE4 Features
Tape and Reel package
48 pins
16 Bits
3.3V power supplies
2 Functions
48 pin count
74AVC16374DGGRE4 Applications
There are a lot of Texas Instruments 74AVC16374DGGRE4 Flip Flops applications.
- Matched Rise and Fall
- Memory
- Patented noise
- Memory
- Data transfer
- Data storage
- Power down protection
- Control circuits
- Shift registers
- Event Detectors