74AUP2G157GD,125
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | 74AUP |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Multiplexer |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.8V~3.6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AUP2G157 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Circuit | 1 x 2:1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 30pF |
| Propagation Delay | 38.8 ns |
| Family | AUP/ULP/V |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Output Polarity | COMPLEMENTARY |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 0.5mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74AUP2G157GD,125 Overview
In order to save board space, digital switch is located in the 8-XFDFN.The package is packaged in the manner of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.Multiplexer is the analog IC that the multiplexers uses.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.A supply voltage of 0.8V~3.6V provides digital controlled switch's superior flexibility for designers.The multiplexers from 74AUP series can be used for a wide range of applications.The basic configuration includes 8 terminations.As its base part number is 74AUP2G157, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 1.1V volts.A component pin count of 8 can be found on this turn signal switch.Its supply type is Single, which is used as the source of power.This multiplexer ic has 8 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the family of AUP/ULP/V.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.As part of the operation of this turn signal switch, there are 1 outputs.The switches package is packaged in accordance with the TAPE AND REEL method.To accept voltage levels, the multiplexers have2 input lines.
74AUP2G157GD,125 Features
Supplied in the 8-XFDFN package
Adopting a supply type of Single
2 input lines
74AUP2G157GD,125 Applications
There are a lot of Nexperia USA Inc. 74AUP2G157GD,125 Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- To select different devices in microprocessor output
- Signal router
- Metal detectors
- Enabling block of memory depending on address in memory chips
- Data-routing applications
- Memory system of computers
- Paper plants
- Electronic circuits
- Data transfer