74ALVT16823DL,512
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ALVT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 56 |
| Type | D-Type |
| Additional Feature | ALSO OPERATES FROM 3V TO 3.6V SUPPLY |
| Technology | BICMOS |
| Voltage - Supply | 2.3V~2.7V 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ALVT16823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Clock Frequency | 250MHz |
| Propagation Delay | 5 ns |
| Quiescent Current | 3.9mA |
| Turn On Delay Time | 2.9 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 100μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 24mA; 32mA 64mA |
| Max Propagation Delay @ V, Max CL | 3.1ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 5mA |
| Number of Output Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74ALVT16823DL,512 Overview
In the form of 56-BSSOP (0.295, 7.50mm Width), it has been packaged. It is included in the package Tube. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 2.3V~2.7V 3V~3.6V. In this case, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74ALVT series. Its output frequency should not exceed 250MHz Hz. There are 2 elements in it. As a result, it consumes 100μA quiescent current. In 56terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. It is a member of the 74ALVT16823 family. The power supply voltage is 2.5V. There is 3pF input capacitance for this T flip flop. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 56 pins. This device's clock edge trigger type is Positive Edge. It is designed with a number of bits of 18. The flip flop has 2embedded ports. It operates with 9 output lines. In terms of quiescent current, it consumes 3.9mA . Additionally, you may refer to the additional ALSO OPERATES FROM 3V TO 3.6V SUPPLY of the electronic flip flop.
74ALVT16823DL,512 Features
Tube package
74ALVT series
56 pins
18 Bits
74ALVT16823DL,512 Applications
There are a lot of Nexperia USA Inc. 74ALVT16823DL,512 Flip Flops applications.
- Memory
- Storage Registers
- Test & Measurement
- Matched Rise and Fall
- Load Control
- Clock pulse
- Registers
- Pattern generators
- Data transfer
- Latch