74AHCT594PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT594 |
| Function | Serial to Parallel, Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 11.7 ns |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT594PW,112 Overview
In package 16-TSSOP (0.173, 4.40mm Width), there is an embedded device. It sums up to 16 where the chip's terminations add up. There is a Tube case containing it. Its operating supply voltage is rated at 5V. The device is equipped with 16 pins. It is recommended that the mount should be done by Surface Mount. In the HCT series, the electronic component belongs. Mounted in the same way as Surface Mount. Operating temperatures are within the range of -40°C~125°C. During operation, the voltage is within the range of 4.5V~5.5V. The 74AHCT series is associated with this electrical component. Similar parts can be found by searching for the 74AHCT594 family. The operating supply voltage of this chip is noted to be within the range 5V. For this part, Vsup should not be less than 2V. 1 input lines are available on the device. A total of 9 output lines are available for operation.
74AHCT594PW,112 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHCT594 family
Operate supply voltage at 5V
With 9 output lines
74AHCT594PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT594PW,112 Shift Registers applications.
- ROM Chips
- 7-segment display control
- LED matrix control
- Pulse Extenders
- Data Format Converters
- Cache memory in CPU
- Serial-to-parallel data conversion
- Remote control holding register
- Parallel data
- Data Processors