74AHCT594BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT594 |
| Function | Serial to Parallel, Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 11.7 ns |
| Turn On Delay Time | 11.7 ns |
| Family | HCT |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Length | 3.5mm |
| Width | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHCT594BQ,115 Overview
There is a 16-VFQFN Exposed Pad package embedded with the device. 16 is the total number of terminations on the chip. Presented in a case of Tape & Reel (TR). 5V is the operating supply voltage of the part. 16 pins are present on the device. It is recommended to mount by Surface Mount in order to get the best results. There is an electronic component in the HCT. Mounted in the same way as Surface Mount. It is important to note that the operating temperature range is -40°C~125°C. During operation, the voltage is within the range of 4.5V~5.5V. Similar parts can be found using the 74AHCT family. You can search for similar parts based on the 74AHCT594 family. It is noted that this chip uses an operating supply voltage of 5V. This part must have a minimum supply voltage (Vsup) of 2V. As far as the device is concerned, there are 1 input lines available. It is necessary to operate 9 output lines.
74AHCT594BQ,115 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHCT594 family
Operate supply voltage at 5V
With 9 output lines
74AHCT594BQ,115 Applications
There are a lot of Nexperia USA Inc. 74AHCT594BQ,115 Shift Registers applications.
- Remote control holding register
- Dual-rank shift, hold, and bus applications
- LED matrix control
- Sequence generator
- Serial-to-parallel data conversion
- Flash Memory
- Parallel data
- Pseudo Random Pattern Generator
- Counter
- Pattern Recognizers