74AHCT574D,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 4.4 ns |
| Turn On Delay Time | 6.3 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHCT574D,112 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -40°C~125°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74AHCTseries FPGA. It should not exceed 115MHzin terms of its output frequency. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 20 terminations have been made. The 74AHCT574 family contains this object. Power is provided by a 5V supply. Its input capacitance is 3pF farads. In this case, the D flip flop belongs to the AHCT/VHCT/VTfamily. It is mounted by the way of Surface Mount. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. There are 8bits in its design. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. A total of 8input lines have been provided. It is also characterized by BROADSIDE VERSION OF 374.
74AHCT574D,112 Features
Tube package
74AHCT series
20 pins
8 Bits
74AHCT574D,112 Applications
There are a lot of Nexperia USA Inc. 74AHCT574D,112 Flip Flops applications.
- Event Detectors
- Functionally equivalent to the MC10/100EL29
- ESD performance
- Data transfer
- Asynchronous counter
- Instrumentation
- Frequency Dividers
- Storage Registers
- Load Control
- Clock pulse