74AHC595T16-13
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74AHC |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74AHC595 |
| Function | Serial to Parallel, Serial |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2.5/5V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 5.7 ns |
| Quiescent Current | 4μA |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| fmax-Min | 90 MHz |
| Max Frequency@Nom-Sup | 40000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AHC595T16-13 Overview
16-TSSOP (0.173, 4.40mm Width) is a package containing the embedded device. 16 is the sum of the number of terminations in the chip. A Tape & Reel (TR) case is used to pack it. There is 5V operating supply voltage listed on the part. The device is equipped with 16 pins. It is recommended that the mount should be done by Surface Mount. This electronic component is classified as AHC/VHC/H/U/V. As you can see, this component is mounted in the way of Surface Mount. A temperature range of -40°C~125°C is used for operation. There is a voltage supply within 2V~5.5V. This electrical component belongs to the 74AHC series. By using the 74AHC595 family, you can find similar parts. There must be a minimum supply voltage (Vsup) of 2V for this part. In the device, there are 1 input lines. There is a possibility of delivering voltage at 2.5/5V. The maximum supply voltage (Vsup) for this part should not be more than 5.5V. There is a quiescent current of 4μA in this circuit.
74AHC595T16-13 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC595 family
It supplies 2.5/5V power
Quiescent Current at 4μA
74AHC595T16-13 Applications
There are a lot of Diodes Incorporated 74AHC595T16-13 Shift Registers applications.
- Parallel to serial converter
- Flash Memory
- Data Format Converters
- 7-segment display control
- Data manipulation
- Sequence generator
- Serial to parallel converter
- Dual-rank shift, hold, and bus applications
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion