74AHC595PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC595 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 4 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 20.1 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74AHC595PW,112 Overview
16-TSSOP (0.173, 4.40mm Width) is the package in which the device is embedded. 16 is the sum of the number of terminations in the chip. The Tube case contains it. A voltage of 5V is specified for the part's operating supply. 16 pins are available on the device. Surface Mount is recommended for mounting. Electronic components fall under the category of AHC/VHC/H/U/V. In Surface Mount, this component is mounted. There is a range of operating temperatures -40°C~125°C. Voltages within 2V~5.5V are supplied to the device. 74AHC is the series number of this electrical component. If you use the 74AHC595 family, you can find parts that are similar. According to the specification, this chip's operating supply voltage falls within the range of 5V. This part must have a minimum supply voltage (Vsup) of 2V. In the device, there are 1 input lines. Operation is available on only 9 output lines. A quiescent current of 4μA is used.
74AHC595PW,112 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC595 family
Operate supply voltage at 5V
With 9 output lines
Quiescent Current at 4μA
74AHC595PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHC595PW,112 Shift Registers applications.
- 8-bit data storage
- Interconnectors
- Counter
- temporary data storage
- Sequence generator
- data transfer
- Delay Line
- Serial-to-parallel data conversion
- data manipulation
- Data Format Converters