74AHC594PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2008 |
| Series | 74AHC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74AHC594 |
| Function | Serial to Parallel, Serial |
| Output Type | Push-Pull |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 15.6 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Number of Input Lines | 1 |
| Number of Output Lines | 9 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74AHC594PW,112 Overview
16-TSSOP (0.173, 4.40mm Width) package contains the device. A total of 16 terminations can be found on the chip. A Tube case is used to pack it. There is 5V operating supply voltage listed on the part. 16 pins are available on the device. Using Surface Mount as a mount point is recommended. It is a component of the HC/UH. Surface Mount is the way this component is mounted. Operating temperatures are within the range of -40°C~125°C. During operation, the voltage is within the range of 2V~5.5V. In the 74AHC series, this electrical component is found. By using the 74AHC594 family, you can find similar parts. According to the specification, this chip's operating supply voltage falls within the range of 5V. For this part, Vsup should not be less than 2V. A device with 1 input lines is available. There are 9 output lines to operate.
74AHC594PW,112 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74AHC594 family
Operate supply voltage at 5V
With 9 output lines
74AHC594PW,112 Applications
There are a lot of Nexperia USA Inc. 74AHC594PW,112 Shift Registers applications.
- Parallel data
- Remote control holding register
- store data in digital form
- temporary data storage
- Counter
- data manipulation
- Data Processors
- Parallel to serial converter
- 7-segment display control
- Remote control holding register